Bratney Companies

Cimbria Belt Separator

Data sheet 233

Belt Sorter (BS)

The belt sorter type BS is focused on the rollingcharacteristics of the single kernels. It can separate round from flat or respectively long kernels. Mainly sugar beet seed, peas, soybeans and kernels with similar round shape can be freed of half- broken, sticks or “twins” by this very simple sorting principle, giving good overview of the sorting process by means of the generous insight to the surface of the sorting belts. Modular construction allows the use of several parallel decks to cover a wide capacity-range.

The product is fed continuously with a vibrator feeder unit onto the surface of the belts. The belts are mounted in an adjustable inclined position; the belt moves 90° to this inclination. Kernels which do not roll off by the inclination are conveyed to the right and fall into a hopper. Round kernels are less deflected by the movement of the belt and roll downhill into another hopper. A slide in this hopper allows separating round kernels in two qualities. The adjustment of the inclination is done for all separation belts at once from 25° up to 40°. The belt speed can be adjusted by a frequency converter from 0,25 to 0,8 m/s. The belt separator can be adapted to the product by the use of belts with different surface texture.

At various places of the machine dust extraction connections are provided.
 

Technical Data Unit Type BS
I II III
Belts   1 2 3
Motor (Standard)
Feeder kW 0,18 0,18 0,18
Belt Drive kW 0,55 2x0, 55 3x0, 55
Air Volume
Air Requirement m³/h 700 1400 2100
Dimensions
Length mm 1900 1900 1900
Width mm 1850 1850 1850
Height mm 2050 2500 2950

 

Technical data can vary for certain of the above due to continued development, or a different machine composition.

belt sorter


Download the Cimbria Belt Separator Datasheet


CONTACT US TODAY TO DISCUSS Specialty Seed Sizing Equipment WITH ONE OF OUR EXPERTS!

Contact Us

© 2022 Bratney Companies. All rights reserved.